Call us at 800-341-1557

Walls

The EZ Fabric Wall System™ is designed around a 39 in. W x 93 in. H wall with half width, half height and entry header size variations available. Curved variations are also available.

Many EZ Fabric Walls are available in two wall corner assembly options (locked or welded frames). Locked walls can be broken down for overnight shipping. Welded walls can be shipped whole, are lighter weight, but are typically shipped via Ground methods.

EZ Fabric Walls - flat walls drawing-ezfws-walls-all

Wall	Assembly Type	Size	Part Number	Weight
Full Wall	Locked Corners	39 in. W x 93 in. H	4008104	24.4 lb
Full Wall	Welded Corners	39 in. W x 93 in. H	4008107	22.2 lb
Half-Width Wall	Locked Corners	19.5 in. W x 93 in. H	4008105	21.4 lb
Half-Width Wall	Welded Corners	19.5 in. W x 93 in. H	4008108	19.2 lb
Short-Width Wall	Locked Corners	32.5 in. W x 93 in. H	4008106	23.3 lb
Short-Width Wall	Welded Corners	32.5 in. W x 93 in. H	4008109	21.1 lb
Half-Height Wall	Welded Corners	39 in. W x 46.5 in. H	4008110	14.1 lb
Entry Header	Welded Corners	39 in. W x 14 in. H	4008111	8.6 lb
Curved Full Wall	Welded Corners	31 in. W x 14 in. H	4008152
Curved Entry Header	Welded Corners	31 in. W x 14 in. H	4008153

Included

Two locks & housings on each side of the wall for connecting walls
Two Glide Bumper Feet (NOT on Entry Header & Curved Entry Header)
Dual base plate holes, top (for stacking walls) & bottom*
Dual wire management holes, top and bottom*
Four 10 in. wire management tracks installed on vertical, interior sides
Wire Management Channels Wall Stacking Connectors, and Base Plates sold separately.
*Base plate holes are on the bottom only on the Half-Height Wall and on the top only on the Entry Header & Curved Entry Header. Wire management holes are on the bottom only on the Half-Height Wall and on the top only on the Entry Header & Curved Entry Header.